Magnum Look Mirror heating
Magnum Look Mirror heating always gives a clear look when shaving, cutting and making up. It doesn't take a swipe with the towel to see yourself again at Mirror after showering or using hot water.
Magnum Look is connected and easily switched via the light switch and prevents condensation in no time. It also prevents the nasty towel streaks that remain after condensation is removed. Connection directly to the mains, via the light switch in the bathroom, prevents unnecessary waste of energy.
Magnum Look Mirror heating is a self-adhesive heating foil element that can be applied directly to the back of Mirror. The elements are double-insulated and can therefore also be used in bathrooms (damp rooms).
The power realises a fast warm-up time of approx. 5 to 8 minutes. In that short time, the Mirror already reaches a temperature of approx. 40°C and condensation is prevented. The maximum achievable mirror temperature is limited to approx. 50°C. This makes the product absolutely safe to touch.
Magnum Look Supplied as standard including
*Heating foil with self-adhesive backing
*±1 metre connecting cable
*Installation instructions
Warranty
2-year warranty on electrical operation.
Technical data
*Thickness: 1 mm
*Voltage: 230 volts
*Connection: 2-core, double insulated
*Class: IP-34, class 2
*Testing: FIMKO, CE marking
*Temperatures: 40-50°C (depending on ambient temperature)
Film application
The Mirror must not be damaged (e.g. broken off pieces of the edge, manually cut to size, etc.) due to possible cracking caused by tension differences during heating. To attach, simply use the self-adhesive backing. This should be applied directly to the back of Mirror.
ATTENTION: The film has a very high adhesive strength, making it permanently attached.
