Magnum Look mirror heating
Magnum Look mirror heating always provides a clear view when shaving, hairdressing and making up. It does not take a wipe with the towel to see yourself again in the mirror after showering or using hot water.
Magnum Look is connected and easily switched via the light switch and prevents condensation in no time. It also prevents the nasty towel streaks that remain after removing condensation. Connection directly to the mains, via the light switch in the bathroom, prevents unnecessary waste of energy.
Magnum Look mirror heating is a self-adhesive heating foil element that can be applied directly to the back of the mirror. The elements are double insulated and may therefore also be used in bathrooms (humid areas).
The power realizes a fast heating time of about 5 to 8 minutes. In that short time, the mirror is already brought to a temperature of approx. 40°C and condensation is prevented. The maximum achievable mirror temperature is limited to approx. 50°C. Thus the product is absolutely safe to touch.
Magnum Look is supplied as standard including
*Heating foil with adhesive backing
*±1 meter connecting cable
*Installation instructions
Warranty
2-year warranty on electrical operation.
Technical data
*Thickness: 1 mm
*Voltage: 230 volts
*Connection: 2-core, double insulated
*Class: IP-34, class 2
*Testing: FIMKO, CE marking
*Temperatures: 40 to 50°C (depending on ambient temperature)
Film application
The mirror should not be damaged (e.g. broken off parts of the edge, manually cut to size etc.) because of possible cracking due to tension differences during heating. For attachment you can simply use the self-adhesive backing. This should be applied directly to the back of the mirror.
NOTE: The film has a very high adhesive strength, therefore it is permanently attached.
