Gira System 3000 universal led rotary dimmer base element Standard

Features

• Switching and dimming of incandescent lamps, HV halogen lamps, electronic transformers for halogen or LED lamps, dimmable inductive transformers for halogen or LED lamps, HV LED or energy-saving lamps.
• Automatic setting of the dimming principle appropriate to the load (phase on or phase off).
• Lamp protective switching.
• Switch-on brightness can be stored permanently.
• Switch-on with the last set brightness or stored switch-on brightness.
• Minimum brightness adjustable.
• Electronic short-circuit protection.
• Electronic overheating protection.
• Operation with and without neutral conductor connection.

Technical data.

• Rated voltage: AC 230 V, 50/60 Hz
• Standby: max. 0.35 W
• Connected load at 25 °C
  • HV LED lamps (phase cut): typ. 3 to 60 W
  • HV LED lamps (phase cut): typ. 3 to 120 W
  • Energy-saving lamp: typ. 3 to 60 W
  • Incandescent lamps: 20 to 210 W
  • HV halogen: 20 to 210 W
  • Gira Tronic transformers: 20 to 210 W
  • Electronic transformer with LV LED: Typ. 20 to 60 W
  • Wound transformer: 20 to 210 VA
  • Wound transformer with LV LED: typ. 20 to 60 VA
• Cable length
  • Load: max. 100 m
• Installation: in appliance box according to DIN 49073
• Installation depth: 24 mm
• Ambient temperature: -5 °C to +45 °C

Notes

• In principle, operation of the dimmer is possible without connection of the neutral conductor. With some LED and CFLi light sources, however, connection of the neutral conductor is required to prevent flickering.
• When operated without a neutral conductor, the minimum load for incandescent lamps, HV halogen, Gira Tronic transformers and wound transformers is 50 W.
• Electronic transformers and ballasts for LED light sources can be operated with the dimming procedure specified by the manufacturer.
• If the ambient temperature exceeds 25 °C, the connected load must be reduced.