Easy Drain Slim STB03 top bend 90 degrees ahead (each)
Including rubber 40/32 and cement cap
SlimTube drainpipe
The ingenious drainpipe
An ingenious thin drainpipe that makes fitting a drainpipe from Washbasin, Wash-hand basin etc. simpler, cheaper and more efficient. Instead of a PVC drain of around 40 mm, you can now save time and aggravation with SlimTube. Cutting a 40-50 mm recess is a thing of the past. SlimTube can also be installed in front of the (concrete) wall and filled in with plaster or screed. (e.g. Blueboard/Wedi). This saves a lot of installation space.
Low installation depth
Slim Tube is only 20 mm deep, so much less cutting and routing is required. The risk of irreparable damage to the wall (front and back) is now a thing of the past and the wall construction remains virtually intact.
Fully adaptable
Slim Tube is made of PVC, therefore easy to glue. You can cut the tube to size and fit the fittings. SlimTube comes as standard with transition rubber 40/32 and spacer cap. If necessary, Slim Tube can be installed in front of the wall and filled with plaster or finishing boards. Use Slim Tube only vertically.
Technical information
*Material - Gluable ABS
*Diameter - 40 mm internal (siphon connection) / 50 mm external (drain connection)
*Width - 65 mm
Installation
*Saw the flat oval PVC pipe to the desired length
*Unburr the ends of the tube and fitting, sand and clean carefully
*Lubricate the pipe evenly with PVC glue/adhesive and connect it directly
*Remove excess glue and do not apply pressure to the joint while drying
*For more information, see the leaflet of the PVC adhesive used