Blanke Aqua Keil Wall 8462840100L sealing profile 1480x10x32mm left stainless steel chrome-plated
Blanke Aqua Keil Wall 8462840100L sealing profile 1480x10x32mm left stainless steel chrome-plated
- 10
- 0mm
Blanke Aqua-Keil Wall sealing profile
Sealing profile for shower floor/wall
* High-quality end profile for use in combination with linear drainage systems
* Easy assembly (inclination 2 %)
* No more time-consuming cutting of tiles
* Different inclination angles can be achieved by using different tile thicknesses
* Right and left-hand versions available
h1 = 10mm
h2 = 32mm
Application
Blanke AQUA-KEIL WAND allows the connection between the sloping floor surface and the wall in walk-in showers with a linear drain system.
Processing
Blanke Press AQUA-KEIL WAND with the perforated fixing shims into the fresh tile adhesive and set it correctly. Press the connecting tiles against the profile and position so that the upper side of the profile and the tiles are flush with each other. Here we must avoid hollow tones. Maintain a joint width of 1 to 1.5 mm between profile and tiles. Fill the joint completely with grout. When shortening the profile, always cut the highest side. When cleaning the profiles, never use steel wool or a wire brush as corrosion can occur due to surface wear. Cleaning products must not contain hydrochloric acid or chlorine.
