Blanke Aqua Keil Wall 846280B125R (8511) sealing profile 1480x12.5x32mm right brushed stainless steel
Blanke Aqua Keil Wall 846280B125R (8511) sealing profile 1480x12.5x32mm right brushed stainless steel
- 12
- 5mm
Blanke Aqua-Keil Wall sealing profile
Sealing profile for shower floor/wall
* High-quality sealing profile for use with linear drainage systems.
* Easy assembly (inclination 2%)
* No more time-consuming cutting of tiles.
* Different slope angles can be achieved by using different tile thicknesses
* Right and left-hand versions available
h1 = 12.5mm
h2 = 32mm
Application
BlankeAQUA-KEIL WAND allows the connection between the sloping floor surface and the wall in walk-in showers with a linear drain system.
Processing
BlankePress AQUA-KEIL WAND into the fresh tile adhesive with the perforated fastening shims and set it correctly. Press the connecting tiles against the profile and position so that the upper side of the profile and the tiles are flush with each other. Here we must avoid hollow tones. Maintain a joint width of 1 to 1.5 mm between the profile and the tiles. Fill the joint completely with grout. When shortening the profile, always cut the highest side. When cleaning the profiles, never use steel wool or a wire brush as corrosion can occur due to surface wear. Cleaning products must not contain hydrochloric acid or chlorine.
