Blanke Aqua Keil Wall 845280B080R sealing profile 980x8x24mm right stainless steel brushed
Blanke Aqua Keil Wall 845280B080R sealing profile 980x8x24mm right stainless steel brushed
- 8
- 0mm
Blanke Aqua-Keil Wall sealing profile
Sealing profile for shower floor/wall
* High-quality sealing profile for use with linear drainage systems.
* Easy assembly (inclination 2%)
* No more time-consuming cutting of tiles.
* Different slope angles can be achieved by using different tile thicknesses
* Right and left-hand versions available
h1 = 8mm
h2 = 24mm
Application
Blanke-AQUA-KEIL WAND allows the connection between the sloping floor surface and the wall in walk-in showers with a linear drain system.
Processing
Blanke-Press and set AQUA-KEIL WAND correctly into the fresh tile adhesive using the perforated fastening shims. Press the connecting tiles against the profile and position them so that the upper side of the profile and the tiles are flush with each other. Here we must avoid hollow tones. Maintain a joint width of 1 to 1.5 mm between the profile and the tiles. Fill the joint completely with grout. When shortening the profile, always cut the highest side. When cleaning the profiles, never use steel wool or a wire brush as corrosion can occur due to surface wear. Cleaning products must not contain hydrochloric acid or chlorine.
