Sealing profile for shower floor/wall
* High-quality end profile for use in combination with linear drainage systems
* Easy assembly (inclination 2 %)
* No more time-consuming cutting of tiles
* Different inclination angles can be achieved by using different tile thicknesses
* Right and left-hand versions available
h1 = 10mm
h2 = 40mm
Application
Blanke-AQUA-KEIL WAND allows the connection between the sloping floor surface and the wall in walk-in showers with a linear drain system.
Processing
Blanke-Press and set AQUA-KEIL WAND correctly into the fresh tile adhesive using the perforated fixing shims. Press the connecting tiles against the profile and position so that the upper side of the profile and the tiles are flush with each other. Here we must avoid hollow tones. Maintain a joint width of 1 to 1.5 mm between profile and tiles. Fill the joint completely with grout. When shortening the profile, always cut the highest side. When cleaning the profiles, never use steel wool or a wire brush as corrosion can occur due to surface wear. Cleaning products must not contain hydrochloric acid or chlorine.
