Magnum Mat Regular 201205 X-treme Control set underfloor heating 900W 6.00 m²

Magnum Mat underfloor heating

The MAGNUM Mat is a unique underfloor heating mat. The system has been developed to install underfloor heating over an existing tile floor or on a already applied finishing floor. The mat is approximately 4 mm thin and can be embedded in a layer of adhesive without the need for demolition or milling. The mat is placed directly beneath the surface, which increases the floor's heating speed, making the system suitable for spaces with non-permanent occupancy, such as bathrooms, hobby rooms, and recreational areas. The advanced thermostat takes into account the required warm-up time, ensuring that your floor always reaches the desired temperature at the right time.

The MAGNUM Mat is available in 22 different sizes, ranging from 0.75 to 25 m². Due to the connection of the heating cable at the end of the mat, only one side requires a power cable, which is invisibly attached using a unique connection. As a result, there is no need for a return cable to be connected to the thermostat.

The MAGNUM Mat is supplied as a complete set, including:

• Heating mat
• MAGNUM X-treme Control thermostat with floor sensor
• Flexible tube for the floor sensor
• Installation instructions & Check/Control card

Certification:

The MAGNUM Mat is VDE certified. VDE is one of the largest technical and scientific certification bodies in Europe.

Warranty:

The MAGNUM Mat has a lifetime warranty on the electrical operation of the heating mat and a 2-year warranty on the thermostat and floor sensor.

Technical specifications:

• EMC-free 2-conductor cable attached to a fiberglass mesh
• 2.5-meter three-core power cable
• Complete enclosure with an aluminum earth sheath
• Unique hidden connection between heating and connection cable
• Chrome/Nickel resistance wire
• PTFE (Teflon) insulation
• PVC protective sheath
• 10-11 watts per meter resistance wire, 230 volts
• Cable diameter approximately 4 mm
• Mat width of 25 or 50 cm
• Complies with current NEN standards for installation in wet areas
• 0.75 m² - 10.0 m²: 150 watts per m² / 12.0 m² - 25.0 m²: 125 watts per m²

Installation methods:

• Directly in tile adhesive
• Self-leveling screeds
• In plaster/mortar
• Anhydrite floors